Wavlink AC600 2.4g/5G High Power POE Outdooor Waterproof WIFI Router/AP Repeater
The AC600 AP/Router is mainly used for providing free WiFi service in big area such as factory, community, street or etc. The AP/Router can take an existing 2.4GHz or 5GHz wireless signal, repeater and extend it to a longer range where it is too far away for the router or access point to reach.
The AP/Router simultaneously supports 2,4G and 5G Wireless network connection, and it can supports 2.4G and 5G transmission speeds of up to 583Mbps,It has 2 x external Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel using its channel selection feature.
–The nest generation of WiFi.leading 802,11ac standard, complies with IEEE 802.11 ac/a/b/g/n standards
–Dual Band Speed up to 2.4GHz 150Mbps 5GHz 433Mbps, high Transmission Power Breaking down the barriers of WiFi
–Provides external RP SMA connector for higher gain antenna upgrade, water-proof RJ45 Connector
–Operation Modes:Router AP Repeater WISP
–Provides WEP,WPA/WPA2.WPA-PSK /WPA2-PSK data security, ethernet (POE) Support for Flexible Deployment
Features
–The nest generation of WiFi.leading 802,11ac standard
–Complies with IEEE 802.11 ac/a/b/g/n standards
–Dual Band Speed up to 2.4GHz 150Mbps 5GHz 433Mbps
–High Transmission Power Breaking down the barries of WiFi
–Provides external RP SMA connector for higher gain antenna upgrade
–Robust weatherproof case withstands harsh outdoor conditions
–Water-proof RJ45 Connector
–Passive power over Ethernet(POE) Support for Flexible Deployment
–Operation Modes:Router AP Repeater WISP
–Provides WEP,WPA/WPA2.WPA-PSK /WPA2-PSK data security
–Designed with 3 x WiFi Signal strength LED
–Build in lightning arrester(15k V ESD)
How it work
1.Place the straps through the slots on the back of the AP/Router and then around the pole Tighten the straps
2.Connect one end of an LAN cable to the POE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.Then,connect the LAN port of the power inject t a PC using another LAN cable.Finally,plug the power adapter into a wall socket..
3.The connection will be similar to the figure below after the above steps are finished.
Package Included:
1 x WiFi AP/Router
2 x Antenna
1 x power Adapter
1 x POE Converter
1 x RJ-45 Networking Cable
1 x Main body holder
1 x Screw fitting
2 x Cable ties
1 x Quick Installation
